Hauthane - HD-2120 DMM - EM Sullivan - Polyesters

Enhanced TDS

Labeling Claims: APEO-Free,
NMP-free
CASE Ingredients Features: Alcohol Resistance,
Chemical Resistance,
Excellent Adhesion,
Good Hydrolysis Resistance,
Good Toughness,
Humidity Resistance,
Improved Hardness,
Stain Resistance,
UV Resistance

Markets: Automotive & Transportation,
Consumer Goods
Applications: Automotive & Transportation — Automotive
Interior
Consumer Goods — Furniture
Application Method: Dip Coating,
Gravure Coating,
Spray
Compatible Polymers & Resins: Acrylics
Compatible Substrates & Surfaces: Polyvinyl Chloride (PVC),
Vinyl
Use Level: 5 - 10% (DPnB coalescing solvent)
Suggested Use: Hauthane HD-2120 DMM was developed for use on rigid PVC. Coatings containing this polymer form hard, tough, hydrolysis-, chemical- and stain-resistant films, which approach 2-component polyurethane performance levels. Superior adhesion to PVC makes it the ideal candidate for automotive interior parts, vinyl furniture, and components.
Product Applications: Hauthane HD-2120 DMM can be used as a sole vehicle or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for alternative application methods.
Drying: The addition of coalescing solvent is recommended to achieve optimal film formation with HD-2120 DMM. In ambient-cured systems the addition of 5-10% DPnB coalescing solvent is suggested. Less coalescing solvent is required in heat-cured systems to attain comparable film properties. Typical drying temperatures and dwell times for aqueous coatings are sufficient to optimize film characteristics.

Physical Form

Dispersion

Physical Properties


	Value	Units	Test Method / Conditions
Solid Content	34 - 36	%	-
Viscosity*	30 - 300	cPs	-
Density	8.7	Ibs/gal	-
pH	7.5 - 10.0	-	-
Softening Point	355	°F	-
Volatile Organic Compounds (as Supplied)	111	gm/l	-
Volatile Organic Compounds (less Water)	256	gm/l	-
Sward Hardness	52	-	-

Tensile Properties


	Value	Units	Test Method / Conditions
100% Modulus (Tested at 20 Inches/minute)	NA	-	-
200% Modulus (Tested at 20 Inches/minute)	NA	-	-
300% Modulus (Tested at 20 Inches/minute)	NA	-	-
Elongation (Tested at 20 Inches/minute)	35	%	-
Tensile Strength (Tested at 20 Inches/minute)	8500	psi	-

Product Characteristics

Note

*Provisional Specification - May be revised after plant scale-up.