Ascotrust® X2

• Ascotrust® X2 is preferably added at the last manufacturing step (post-addition).
• In 2K systems : should be added into the resin part in most cases.
• Indicative use dosages (% of total coating weight) : 1 to 3% depending on the coating formulation.
• The dosage can reach 5% into pigmented coatings applied on highly reactive rusted substrates, at low DFT (<40-50 μm).
• It is advisable to determine the optimum amount by a laboratory test.

• Ascotrust® X2 is added to waterborne coatings directly applied on rusted or poor-prepared ferrous substrates.
• It ensures an effective blocking effect on residual rust, and avoids its migration through the fresh paint film.
• Its passivation properties on rust allow to maintain good anticorrosion performances of the coatings, despite the adverse substrate conditions.
• It doesn’t compromise the coating anticorrosion performance on non-rusted substrates.
• Ascotrust® X2 is mainly designed for waterborne clear- coatings based on various binder technologies : acrylic, alkyd, epoxy, PU,etc.
• It is recommended to use an organic-type anticorrosion agent when Ascotrust® X2 is added to a metal clear-coating formulation.

*according to directive 2004-42-CE

• Plastic pail of 30kg net.
• Metal drum of 200kg net.
• IBC of 1000 kg net.

• Brut packaging weight and size (off-pallet) :
• Pail : 31,5 kg - Ø30, H50
• Drum : 220 kg - Ø60, H90
• IBC : 1060 kg - L120, l100, H120

• Ideal temperature conditions: 0 to 30°C.
• Expiration : 1 year in its original closed drum, in storage conditions described above.
• Some cristals may form when Ascotrust® X2 is stored at temperatures below 0°C for several days.
• Ascotrust® X2 will recover its initial properties after warming at ambient temperature.